PCA
4.8 Fuel Selection Screen
«NATGAS FUEL
OIL #2 KEROSENE
OIL #4 PROPANE
OIL #6 COAL
Operation
This screen is displayed by pressing the
MENU
key from the Combustion
Test Screen, and is used to select the fuel being burned.
To select a fuel, first use the
st
keys to move the cursor (
z
) in front of the
desired fuel, and then press the
ENTER
key.
NOTE: The fuel selected is saved as the default, and re-
mains in memory after the PCA is turned off.
The fuel codes as displayed in the Combustion Test Screen:
NG = Natural Gas
KER = Kerosene
O#2= Oil #2
LPG = Propane
O#4= Oil #4
COL = Coal
O#6= Oil #6
Front Panel Key Functions:
– Move cursor (
z
) up
– Move cursor (
z
) down
– Select Fuel
– Go to Combustion Test Screen
– Go to Draft Screen for PCAs with a pressure sensor, or the
Memory Directory Screen for PCAs without a pressure
sensor
Instruction 0024-9219
4-11
Summary of Contents for Portable Combustion Analyzer
