46
Instruction 3015-4148
If the current
Zone Screen
appears normal, scroll through the displays using the NEXT/BACK keys or the
UP/DOWN cursor keys until you locate the affected zone. You can further investigate the status of the
affected zone by pressing the adjacent key and going to that
Zone’s Setup Screen
#1
(Page 41). You may
also press the ALARMS key to go directly to the
Alarm Summary Screen
(Page 50). Refer to
Working with
Alarms
on Page 50 to learn more about responding to alarms.
Fault Conditions
If a system malfunction occurs, the yellow FAULT LED will glow. Additionally, an external alarm device may
activate and an audible alarm may sound if those features have been enabled (Pages 28 & 35).
From the top level
Zone Screen
(Page 44), press the SYSTEM key to go to the
System Screen
(Page 31)
and then press the FAULTS key to go to the
Fault Screen
(Page 54). Refer to
Working with System Faults
on Page 54 to learn more about responding to system faults.
