7
8
ASSEMBLY
ASSEMBLY
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 7b
Fig. 7c
Fig. 7d
7)
• Loop the flap on the back of the pad over the top of the Seat Back. Connect
the Seat Pad to the Seat Back with the two Elastic Loops. These fit over the
Attachment Tabs located near the top harness slots (Fig. 7a).
• Attach the bottom of Seat Pad to the Seat Base with the two Elastic
loops located at the rear of the bottom of the Seat Pad. These fit over the
Attachment Tabs located on the Seat Base near where the Seat Back and
Seat Base Join (Fig. 7b).
• Attach each anchor hook of the Seat Pad to the side of the seat armrest
(Fig. 7c). Ensure that the slot of the anchor hook slides through the under
side division (Fig. 7d).
Fig. 7a
WARNING:
Always check
that the high chair is locked
in the open position before
using.
WARNING:
The tray is
not designed to hold the child
in the chair. The child should
be secured in the high chair
at all times by the 5-point
restraining system, either in
the reclining, semi-reclining or
upright position.
TO ATTACH TRAY
8)
• To attach the Tray, line up the grooves on
the bottom of the tray with the armrests of
the high chair. Push the tray down until it fits
firmly into the slots on the high chair (Fig.
8a). The Tray has a
4-position
adjustment.
To adjust the position, squeeze the Tray’s
release handle located underneath the tray
and reposition the tray to the desired position
(Fig. 8b). Release the Tray’s handle. Check
that the Tray is securely locked in its new
position.
TO ATTACH TRAY INSERT
9)
• The dishwasher safe food Tray Insert snaps
onto the High Chair Tray and is held in
place by tabs on the sides of the Tray. When
installing the Tray Insert make sure that its
snaps into place to prevent the child from
removing the Tray Insert. To remove Insert,
unsnap the tabs from the Tray.
• The Tray may be stored on the back legs of
the High Chair. Align the holes in the rear of
the tray with the small pegs on the back legs
(Fig. 9).
NOTE:
To remove, lift the tray.
Fig. 9
Fig. 8b
Tray Release located underneath tray
Fig. 8a
4-position
