13
14
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 11e
Fig. 11g
Fig. 11f
Buckle Strap
Recline Seat Strap
Ensure the stroller adapters are
positioned on the middle position.
See
step 10 for installation.
Attach the seat by lining up the seat
anchors on the side of the seat with
the anchors on the stroller frame and
pushing them together until they
click securely (Fig. 11e).
The seat can
face in either direction, frontward or
backward.
Carriage Mode
Make sure the buckle strap
underneath the seat is unbuckled.
Then loosen the recline seat strap by
squeezing the adjuster and pulling
downwards (Fig. 11f). The carriage
should be fully extended before using.
NOTE:
The footrest area should be
unbuckled (Fig. 11g).
BUMPER BAR
WARNING:
Do not use bumper bar to lift
or carry seat with child inside. The bumper bar is not a
carrying handle.
WARNING-FALL HAZARD:
Bumper
bar is not designed to support a car seat, stroller may
become unstable.
Attach the bumper bar by lining up anchors with the slots on the seat.
Push until it locks into place (Fig. 13a).
NOTE:
The bumper bar must be
securely attached before using this product.
To detach the bumper bar, press the release button on the bottom of
the bar on each side, and pull bar out of the anchors (Fig. 13b).
13
12
Fig. 13a
Fig. 13b
Fig. 12a
BUMPER BAR HANDLE COVER
To attach:
Before attaching the bumper bar to the stroller,
wrap the handle cover around the bar (Fig. 12a).
