27
28
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
If adjustment or replacement
is necessary:
If replacing the front wheel:
Press the pin located behind
the wheel hub. Pull the wheel
out from the hub (Fig. 22a).
If replacing the rear wheel:
Press the release pin to
disconnect (Fig. 22b). Repeat
for the other side.
SEAT PAD
To clean the seat pad, use
only mild household soap or
detergent and warm water on a
sponge or clean cloth.
OTHER
Check your stroller for loose
screws, worn parts, torn
material or stitching on a
regular basis. Replace or repair
parts as needed.
FRONT AND REAR WHEEL RELEASE
22
MAINTENANCE
Fig. 22a
Fig. 22b
Ensure the stroller towers are
properly closed (See Fig. 9c).
OPTIONAL:
The stroller can be
folded with the
(1)
Toddler Seat
Mode facing forward in the
highest position (2) OR without
the seat installed
(see Fig. 21b).
DO NOT
remove the seat while
child is inside.
Stroller - Fold Latch
To fold the stroller, pull the
stroller back to position, the
front wheel forward facing and
engage the brakes.
(1)
Push both buttons while
(2)
lifting up both triggers on the
frame (Fig. 21a).
Push down
on the stroller handle until the
stroller is completely folded.
Compress stroller and secure
with fold latch (Fig. 21b).
21
TO FOLD STROLLER
WARNING:
Care must be taken when folding
and unfolding the stroller to prevent finger entrapment.
WARNING:
Care must be taken when folding
stroller to prevent damage. Make sure all accessories,
mobile phones, diaper bags or purses are removed before
folding. Failure to remove items in, or on the stroller so may
result in damage to the stroller or the item(s) if not removed.
Baby Trend® will not be liable or warrant any damage.
CAUTION:
Do not allow children near stroller
while folding.
Fig. 21b
Fig. 21a
1
2
Release Pin
Release Pin
1
2
