9
10
ASSEMBLY
ASSEMBLY
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Tous droits réservés.
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Tous droits réservés.
2)
• Insert the left and right
sides’ Height bracket into
the front tube of the Upper
Frame Assembly as shown in
(Fig. 2a).
NOTE: The front tube is
easily distinguished from
the rear tube by the array
of holes located on the
backside of the front tube.
• Squeeze the Release
Handles on both sides
simultaneously and push
the tube through the Height
Adjusters until it locks in the
highest position (Fig. 2b).
3)
• Insert the Legs into the ends
of the front tube of both the
right and left Upper Frame
Assemblies (Fig. 3a).
NOTE
: Legs are properly
connected when the lock
buttons are lined up with
the holes on the ends of the
Upper Frame Assemblies.
Make sure the lock buttons
are engaged before use.
Front
tube
Front
tube
Fig. 2a
Fig. 2b
Upper Frame
Assembly
Upper Frame
Assembly
Height
Bracket
Release Handle
Fig. 3
Lock Buttons
Fig. 4a
Lock Buttons
4)
• Insert another Leg into the
ends of the rear tube of
both the right and left Upper
Frame Assemblies (Fig. 4a).
NOTE:
Legs are properly
connected when the lock
buttons are lined up with
the holes on the ends of the
Upper Frame Assemblies.
Make sure the lock buttons
are engaged before use.
• To lock the wheel press the
latch down. To unlock lift the
latch (Fig. 4b).
Fig. 4b
