43
44
7.0
Securing Car Seat in Your Vehicle
7.0
Securing Car Seat in Your Vehicle
3. Tighten the vehicle lap belt around the Base by pushing
down hard with your hand or knee in the middle of the
Base. Then pull the vehicle seat belt to tighten.
Note: For more information on how to tighten the belt for
your vehicle seat belt system, see Section
4.0 Selecting A
Vehicle Seat Location
and Section
4.3 SAFE Seat Belt
Systems
, or your vehicle owner’s manual.
4. Check that the base is tightly installed
and stays tightly installed by grasping the
base near the belt path and trying to move
side-to-side. Base should not move more
than 1 Inch (2.54 cm). If you find that the
vehicle seat belt loosens or that the or the base does not
stay tightly secured, please see Section
4.0 Selecting A
Vehicle Seat Location
for the Car Seat to determine if the
position you have selected is adequate and check that you
have completed all of the steps in this section. If vehicle
belt does not stay tightly adjusted around base, see
vehicle seat belts section. A locking clip may be needed
or you may need to move the base to a different seating
location. DO NOT use this seating location if the Car Seat
does not remain tightly installed in the vehicle seat!
7.6 To Remove Base
1. Unbuckle vehicle seat belt.
2. Remove lap belt from Vehicle Belt Path openings.
3. Remove Base.
7.7 Attach Car Seat to Base
1. Remove any toy or other objects
attached to carry handle before
installing car seat in vehicle.
2. Check that nothing is on top of the
base or anything that will interfere
with the proper latching of the Car
Seat to the Base.
3. Place the Car Seat onto the Base
and push down until the Car Seat
locks securely to the Base and you
hear a click (Fig. 44-1).
4. Pull upward on the Car Seat to check
that the Car Seat is securely locked
onto the base. If the Car Seat does
not securely lock onto the Base, the
Car Seat will provide
NO
Protection
for your child.
DO NOT
use the Car
Seat with the Base if it does not
securely lock onto the Base. Please
call Baby Trend®at 1-800-328-7363
for assistance.
Fig. 44-1
Fig. 44-2
CC7906A1118
35
FAILURE TO INSTALL SAFETY SEAT AT CORRECT SEAT ANGLE CAN
CAUSE DEATH OR SERIOUS INJURY
SEAT ANGLE INDICATOR
ADJUST FOOT OF BASE TO SET CORRECT SEAT ANGLE FOR WEIGHT OF CHILD.
SEE INSTRUCTION MANUAL FOR DETAILS.
Child Weight:
1.8 to 15.8 kg
(4 - 35 lbs) Child Height:
81.3 cm or less
(32 inches)
WARNING
DEATH OR SERIOUS INJURY can occur,
Level this line with t
he ground
for children greater
than 10 kg (22 lbs.)
.
- Use only in a rear-facing position when using it in the vehicle.
- Use only with children who weigh between 1.8 and 15.8 kg (4 and 35
pounds) and whose height is 81.3 cm (32 inches) or less.
- Snugly adjust the belts provided with this child restraint around your child.
- Secure this child restraint with the vehicle child restraint anchorage
system, UAS, if available or with a vehicle seat belt.
- Follow all instructions on this child restraint and in the written
instructions located on the side of this child restraint.
- Register your child restraint with the manufacture. Register online
at http://www.babytrend.com/registration.html
- Do not place this restraint in a vehicle seat that has an active
frontal air bag. If an active frontal air bag inflates it can hit the car
seat with great force and cause death or serious injury to your child.
- The carry handle must be in the Rebound position when using it in the vehicle.
Level Line
Indicator
5. Check that car seat is in the correct
recline position based on the weight
of your child. See (Fig. 44-2) and
Section
7.9.7
Adjusting Seat
Recline Angle
.
Seat Angle
Indicator
Center
Center bubble for
children 1.8-10kg (4-22 lbs).
Bulle du centre pour les
enfants pesant entre 1,8 et
10 kg (4 et 22 lb).
CC7908A1118