9
Unfasten the press-stud on the crotch strap and remove from the
bumper bar, refasten the press-stud and lay the crotch strap on top of
the arm rest fabrics on the seat base.
Lift up the leg rest up so that it touches the bumper bar.
Place the liner in the seat unit and fasten the press-studs on the
outside of the liner to the corresponding press-studs on the arm rests.
Fasten the Velcro on the underside of the leg rest with the
corresponding Velcro in the end of the liner.
Fasten the press-studs to the outside wings of the seat back rest (one
left one right) with the corresponding press-studs on the liner.
Fasten the Velcro strips on the base of the liner to the Velcro strips on
the top of the back of the reclined seat backrest.
Thread the D-rings (found on the waist belt of the pushchair harness)
through the openings in the base of the liner.
The D-rings are anchorage points for an independent harness.
WARNING Use a harness as soon as your child can sit unaided.
Place the mattress in the liner with the thickest part at the end nearest
the bumper bar.
Fit the hood so that the fabric at the back of the hood covers the
raised leg rest.
Click the plastic fittings on the hood onto the corresponding fittings on
the pushchair. You will have to rotate the plastic fittings on the hood
to position the hood correctly.
Fit the apron by attaching the press-studs on the front flap of the
apron to the press-studs on the inside of the hood.
Place the top of the apron over the top of the liner and attach the
fastening at the end of the apron to the matching fastening at the foot
end of the liner.
REMOVING THE LINER
To remove the liner, release the press-studs and Velcro fasteners and
lift the liner from the pushchair.
FITTING THE RAIN COVER
The rain cover can be used with the stroller in all combinations.
Drape the rain cover over the stroller seal the fastenings.
Summary of Contents for TS2
Page 2: ...2...
