Press control unit holder or hanging hook firmly and fully into slot in back of control unit
(see illustrations 5, 6 and 7).
IMPORTANT:
To avoid possible danger from sensor cords, ensure that excess cords are pulled back under
the mattress, secured with the included cable tie and are not visible or reachable.
Place mattress securely on top of sensor pads, ensuring firm contact between the mattress and sensor
pads is established.
Please scan QR code below and follow instructions. You may also download the app by selecting
“Babysense” app in the Apple App Store or Google Play Store.
Note:
The Babysense Connect comes with Activated.
8.
9.
10.
To stabilize connectivity and allow continuous communication
between the Babysense Connect and the app, please place the hub in
the same room as the Babysense Connect and ensure it is within
Wi-Fi range. Please install (see instructions below) and pair the hub
as per app instructions.
To apply
: please remove the liner (1) and adhere the one half of the
double-sided hook and loop strip to the wall (2) above the electrical
outlet. Press the hub hook to the hook and loop strip on the wall (3).
Attach the hub to the hub hook (4).
To remove
: please remove the Hub and the hub hook from the adhesive hook and loop strip on the
wall. Hold the strip (5) and gently pull the tab down (6) until the strip loosens completely off the
wall.
Connect the power adapter to the electrical outlet and the Hub.
The LED on the side of the HUB will be on to indicate power. If no LED then the HUB
is not getting power.
Note:
When plugging in Hub please wait 2 minutes before pairing with cellular device.
Note:
Once Hub is installed and connected, BLE can be turned off on your cellular device
.
11.
1
2
5
6
3
4
To Apply
To Remove