BabySafe Corgi, User Manual

Page: 36 / 52

36
8.2 Install child car seat with ISOFIX connector and Top Tether and secure
child in child car seat
8.2.1 Install child car seat
8.2.1.1 Pull the adjuster lever underneath the seat and adjust to upright position(po-
sition 1). (fig.15)
Attention: Use ONLY upright position for Group II, III.
8.2.1.2 Follow pic.2-6 to install ISOFIX and Top Tether.
8.2.2 Secure child in child car seat
8.2.2.1 Place child in child car seat and adjust headrest to make shoulder belt a little
higher than child’s shoulders.
8.2.2.2 Pull 3 point safety belt,guide diagonal section through red belt guide on he-
adrest and lap section through lap belt guide and lap belt hook.Insert buckle till
clear “click” is heard. (fig.16)
Note: Vehicle belt must not have slack and twist during the whole process of instal-
lation. Tigeten both diagonal and lap belt and retract excessive belt.
3 2 1
Group
II+III
: 1