BabyOno 287, User Manual

Page: 7 / 24

7
1.
4.
5.
3.
2.
HOW TO UNFOLD THE COT
1. Undo the bag where the cot is. Take it out and place it in a vertical position.
Undo the Velcro (Fig. 1). Put aside the floor of the cot (Fig. 2).
2. Separate the four corner pillars (Fig. 3).
The sides of the cot when they are folded look like
the letter “V”. Grab in turn the opposite sides of the
cot in the middle of their length and pull quickly
upwards until you hear a clicking sound from both
sides (Fig. 3a and 3b). Make sure that all upper
sides are stiff. If not, pull them again.
3. Push downwards the middle point of the floor
until the cot is entirely unfolded (Fig. 4).
4. Place the floor in the cot so its padded side is on
top (Fig. 5).
3a.
3b.
8.
6. BOW-SHAPED HANDLE WITH TOYS ASSEMBLY
Take out the bow-shaped handle made from fabric, a plastic tube and plastic
clips. Place the plastic tube inside the bow-shaped handle (Fig. 10).
On the ends assemble the plastic clips.
Attach the assembled bow-shaped handle on the cot within the baby’s
range of vision.
7.
9.
10.
X 4
6.
5. CHANGING MAT ASSEMBLY
Take out plastic parts and screws necessary
to assemble the changing mat (Fig. 6). Fasten
them on the shorter tubes with a screwdriver.
Then connect the tubes and make sure that
the pins are in the right openings (Fig. 7).
The unfolded changing mat should be attached
in the part of the cot opposite to the baby’s head.
Assembly takes place by placing the changing
mat from above so that the four plastic fixing
clamps overlap the two opposite longer sides
of the cot (Fig. 8). The changing mat should
be pushed as close as possible to the shorter side
to prevent the existence of gaps (Fig. 9).