16
Choose this icon if you want to hear your baby only when making a loud noise.
This icon allows you to choose the level of sensitivity of the camera’s microphone.
Choose this icon if you want to hear your baby when making a medium noise.
Choose this icon if you want to hear your baby when making a quiet noise.
Sound
sensitivity
YOO-SEE BABYPHONE •
Instructions for use
Problems
Possible causes
Solutions
The camera does not transmit.
• The microphone’s sensitivity is too low.
• Increase the microphone sensitivity with
the
button.
The camera continuously
transmits.
• The microphone’s sensitivity is too high.
• The camera transmits in continuous
transmission mode.
• Decrease the microphone sensitivity with
the
button.
• Adjust the appliance so that it is enabled by the
sound of a voice by pressing on the
button.
The “out of range” alert does
not go off.
• The camera adapter is not plugged in.
• The camera and the receiver are too far apart.
• The connection between both appliances
has failed.
• Connect the power adapter to the camera.
• Bring the receiver close to the camera.
• Repeat the connection settings.
The low battery alert does not
come off.
• Battery does not work.
• Contact our customer support service.
Communication is frequently
interrupted.
• The camera is placed beside to other
electrical appliances.
• Remove the electrical appliances or move the
camera far from sources of interference or start the
connection settings again.
The camera range is too short.
• Both appliances are separated by metal
structures, excessively thick walls or several
obstacles between the two.
• Move the camera or receiver.
TROUBLESHOOTING GUIDE
• Fréquency: 2400 MHz ~ 2483 MHz.
• Maximum output power. Camera: 17.5 dBm
Receiver: 16.5 dBm
• Rated input: 100 – 240 VAC, 50/60 Hz, 0.2 A
• Rated output: 5.0 V - 1 000 mA
Manufacturer: E-TEK Electronics Manufactory Ltd.
Model: ZD5C050100EUDW
Hardware version: V03