11
9. Do not throw the battery in a fire, it may explode.
10. Electromagnetic interference – Do not use your doppler in the immediate vicinity of your
mobile phone or any radio transmitter; this could cause electromagnetic interference.
11. This device cannot be used with a defibrillator or any high-frequency medical device.
12. Avoid shocks and knocks to the device.
13. Only use your doppler and its accessories for the functions it is intended for.
14. Do not let children use your device and its accessories.
15. The doppler should be applied to healthy skin. If you are not sure of the physiological state
of the skin, do not use it.
16. The recommended gel is a hypoallergenic product, non-irritating and non-corrosive. If you
make a skin reaction with the gel, stop the application and consult a physician.
17. The doppler should be cleaned after each use according to recommendations of « Mainte-
nance » section.
18. The doppler should not be used before the 12th week of pregnancy.
19. At the end of its life cycle, the doppler and its accessories should be recycled in accor-
dance with the provisions in force.
20. Be careful to strangulation due to cables, particularly due to excessive length.
07. TECHNICAL FEATURES
Trademark
Babydoppler Connect
Commercial reference
Babydoppler Connect
Safety Class
Type CF applied part
IEC 60601-1:2005 + A1:2012
Electromagnetic
compatibility (EMC)
IEC 60601-1-2 Class B group 1
Internal power supply
This device operates on 3 V DC
(2 x 1.5V AAA size batteries)
Power consumption < 1 W
Appropriate use
As from the 12
th
week of pregnancy
Environment
Working
•Temperature : b5°C and 40°C
•Humidity ≤ 80%
•Atmospheric pressure: between 70 kPa and 106 kPa
Transport and storage
•Temperature: between -10°C and 55°C
•Humidity < 93%
•Atmospheric pressure: between 50 kPa à 106 kPa
Physical features
Dimensions : 105 x 90 x 36 mm
Mass : around 80 g (including the batteries)
Probe
Nomimal frequency : 3 MHz
Operating frequency : 3 MHz ± 10%
Output acoustic power : < 1 MPa
I
spta
: < 100 mW/cm
2
MI et TI < 1
Output intensity of ultrasound : I
ob
< 20 mW/cm
2
Effective Radiating Area of Transducer <208mm²
there is no contact gel, the cables are not plugged in properly or the doppler or batteries may
be malfunctioning. IN CASE OF DOUBT, CONSULT YOUR MIDWIFE OR GYNAECOLOGIST.
The Babydoppler Connect is supplied with a cable specifically developed to allow you to listen
to your baby’s heartbeat on your smartphone and tablet. THE USE OF ANY CABLE OTHER
THAN THE ONE SUPPLIED WITH YOUR BABYDOPPLER CONNECT MAY DAMAGE YOUR
SMARTPHONE OR TABLET. ONLY USE THE CABLE THAT HAS BEEN SUPPLIED WITH THE
BABYDOPPLER CONNECT.
You should also handle the Babydoppler Connect and its cable with care. Do not twist or
damage the cable and do not try to dismantle or repair the doppler or cable yourself.
The information contained in this document is subject to change without notice.
BABYMOOV and LATL TECHNOLOGY declines any liability in case of damage to your doppler,
smartphone or tablet linked to the use of a cable other than the one supplied with your Baby-
doppler Connect or in case of inappropriate use, poor maintenance or changes or repairs made
to the doppler and cables by persons not authorised by BABYMOOV and LATL TECHNOLOGY.
05. PRESENTATION OF THE DEVICE
06. PRECAUTIONS FOR USE
The user is an intended operator. The patient can use and maintain the device and its acces-
sories according to this manual. The Babydoppler Connect is powered by two 1,5V AAA-type
batteries. To avoid any potential danger, use the Babydoppler Connect in accordance with the
following safety rules:
1. Do not open the battery compartment or operating this equipment when the device is switched
on.
2. Do not try to open or dismantle it yourself
3. Maintain correct battery polarity (they should face the correct direction)
4. If the doppler is not used for a long period, remove the battery and store it in a cool, dry
place
5. Keep your doppler and accessories dry. Humidity and liquids may damage the electronic
parts or circuits
6. Do not store your device and its accessories in places with high concentrations of dust. Dust
or microparticles may cause malfunctions.
7. Do not keep your device and its accessories near hot areas. The battery may leak.
8. Your doppler is not appropriate for use in the presence of inflammable liquids and gas.
