![background image](http://html1.mh-extra.com/html/babymoov/a014407/a014407_instructions-for-use-manual_464031016.webp)
- Temperature alarm: ON
/ OFF
.
- Select alarm time repitition (5 s, 10 s, 30 s, 1 min)
.
H34 & H35. Volume
- Volume from 1
to 6
.
BB - BB
1
6
ON
OFF
BABY MONITOR TOUCH SCREEN
• Instructions for use
16
Problem
Possible Causes
Solutions
• No audio or video signal is transmitted.
• The microphone’s sensitivity is too low.
• The mains adapter is not connected correctly to
the transmitter.
• Increase the microphone’s sensitivity by means of
the adjustment system.
• Verify the connection.
• Permanent transmission.
• The microphone’s sensitivity is too high.
• Diminish the microphone’s sensitivity by means of
the adjustment system so that the transmitter is
activated by the voice.
• Alarm out of range permanently activated.
• The distance between the transmitter and the
receiver exceeds the range of action.
• Bring the receiver and the transmitter closer together.
• The image on the screen is not homogeneous or
is fixed or appears in black and white.
• The limits of the range of action have been reached.
• The light intensity is too weak in the baby’s room;
the unit functions in night vision mode and so uses
the infrared LEDs as lighting source.
• Move the receiver closer to the camera.
• Increase the light in the baby’s room.
• Lots of static noise and interference.
• The transmitter is placed beside other
electric appliances.
• Remove the electric appliances or the transmitter
to remove the source of interference.
• Range of action too small.
• There must be a lot of partitions between the
receiver and the transmitter.
• Move the transmitter and the receiver.
TROUBLE SHOOTING TABLE