Short touch icons
(19)
or
(20)
to make your selection, then short press button
(18)
to confirm. means
out of range alarm function is enabled while means this function is disabled. When set to
, the level of radiation
from BU is reduced, however, the PU will not provide an alarm when it falls outside the communication range
of BU. Besides, the BU room temperature will not be shown on PU under standby mode. In case the unit is
paired with two BU, perform setting also for BU no. 2. It is possible the settings can be different for the two
BU.
No lower temperature limit is set
21
BABYPHONE PREMIUM CARE
• Instruction manual
Upper temperature Limit is set at 28°c.
b.
Short touch icons
(19)
or
(20)
, set the upper temperature limit above which the unit will provide an alarm.
Each touch of the icon will cause the reading to advance or retreat one step. Touch and hold the icon
(19)
or
(20)
will cause the reading to scroll up or down rapidly. The allowed selectable temperature range is
- 3° C to + 50°C. In case is selected, no upper temperature limit is set. Confirm your setting by short press
of button
(18)
.
c.
Short touch icons
(19)
or
(20)
, set the lower temperature limit below which the unit will provide an alarm.
The allowed selectable temperature range is -9°C to +44°C or 2°C lower than the selected upper limit. In
case is selected, no lower temperature limit is set. Confirm your setting by short press of button
(18)
and
exit from menu.
d.
Please note the setting of upper and lower temperature limits are same for both BU.
e.
Under standby mode, short touch of menu icon
(21)
will show the setting of out of range alarm function
and temperature alarm.
3. Place this unit at a reasonable distance away from the baby unit to avoid feedback. Too close a distance will
create a screeching sound at the speaker
(24)
.
