www.babylove.com.au
www.babylove.com.au
B.
To fit the batteries , turn the toy car over, undo the battery
cover screw and remove the cover. Fit 2 AA batteries in the
direction shown. (Check that the batteries are fitted correctly
by pushing the coloured button on top of the car. If no music
sounds, check battery installation.) Replace the battery cover
and secure with the screw.
A.
To attach the activity toys. Align each toy with the holes in
tray. Press each plastic base into the hole until it locks into
place. Pull up on the toy to make sure they are locked into
position.
C.
To attach the CAR to the toy tray. Note the Tray orientation
in the image. Make sure the locking arm is on the left. To
attach, align the yellow extension at the front of the CAR
with the opening in the toy tray. Push the extension into
the tray. Push down on the CAR and slide the locking arm
to the right. The CAR should now be locked onto the toy tray.
D.
To remove the CAR from the toy tray, slide the locking arm
to the left and remove the CAR. The CAR also comes with
an accessory strap. It can be attached to other nursery or
furniture items.
D1.
B1.
A.
ACTIVITY CENTRE TRAY ASSEMBLY
D2.
NOTE: You will need 2 x AA batteries to operate the CAR
lights and music sounds.
WARNING: Non-rechargeable batteries are not to be
recharged. Adult supervision is required when charging
rechargeable batteries. Used and new or different types of
batteries should not be mixed. Remove the batteries as
soon as they become exhausted. Supply terminals for
batteries are not to be short circuited.
06
07
4.
A
.
You will notice two white plastic tabs inserted into the tray
moulding. Also two cavities on the underside of the toy tray.
These are to lock the toy tray to the main seat moulding.
B.
Place the assembled toy tray onto the seat moulding so it
sits flat on the surface.
C.
Hold the toy tray down with one hand and with the other
hand locate each plastic tab on the underside of the seat
moulding. One at a time, push them up and into the toy tray
cavity, then rotate the tabs to the right so they lock the toy
tray onto the main seat moulding. To remove the toy tray,
reverse the procedure.
TO FIT & REMOVE THE TOY TRAY FROM THE SEAT MOULDING
5.
A.
B1.
B3.
ACTIVITY CENTRE TRAY ASSEMBLY... continued
B2.
C2.
C1.
B2.
C3.
