3
For Baby & Child Use
PRE-INSTALLATION
PRE-INSTALLATION
IMPORTANT INSTALLATION NOTE:
In some vehicles the anchor fitting in the rear vertical panel can only be installed in one way. Please refer to vehicle owner's
handbook or a child restraint fitting station for correct method.
Consult the vehicle owner's handbook for location of anchor fittings or anchorage points and the
possible use of spacers. Some vehicles may have an anchor fitting fitted by the vehicle
manufacturer. If anchorage points cannot be found refer to car manufacturer or local child restraint
fitting station or traffic authority for optimum position of anchorage point and the use of spacers.
CORRECT ENGAGEMENT OF
ATTACHMENT CLIP TO ANCHOR
FITTING WHEN THE ATTACHMENT
CLIP COVER IS USED.
The shaded areas of this diagram illustrate the possible locations of the anchor fitting. Within
each shaded area is an anchor fitting showing the correct way to install the fitting. Ensure the
anchor fitting is aligned as illustrated unless stated otherwise in the vehicle owner’s handbook.
Front of
vehicle
Extension Strap distance to be measured.
Length 300mm (Use Babylove part K304 or equivalent)
Length 600mm (Use Babylove part K305 or equivalent)
Available from all major child restraint retailers.
Rear facing installation may require a longer extension strap.
IMPORTANT WARNING: THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS
THE RISK OF INCORRECT FITMENT OF THE ATTACHMENT CLIP TO THE ANCHOR FITTING. ALWAYS
ENSURE THAT THE ATTACHMENT CLIP IS CORRECTLY ENGAGED TO THE ANCHOR FITTING AND NOT
HOOKED OR FITTED TO ANY OTHER OBJECT BEFORE EACH USE OF THE RESTRAINT. THIS IS ESPECIALLY
IMPORTANT IN VEHICLES SUCH AS STATION WAGONS, VANS, HATCH BACKS OR VEHICLES WITHOUT A
FIXED PARCEL SHELF, SINCE THE ANCHOR POINT IS USUALLY NOT VISIBLE.
UPPER ANCHORAG E STRAP
