PRE-INSTALLATION ANCHOR FITTING
49
48
Consult the vehicle owner's handbook for location of anchorage fittings or anchorage points and the
possible use of spacers. Some vehicles may have an anchor fitting fitted by the vehicle manufacturer. If
anchorage points cannot be found refer to car manufacturer or local child restraint fitting station or traffic
authority for optimum position of anchorage point and the use of spacers.
UPPER ANCHORAGE STRAP
IMPORTANT:
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS THE RISK OF INCORRECT
FITMENT OF THE ATTACHMENT CLIP TO THE ANCHOR FITTING. ALWAYS ENSURE THAT THE
ATTACHMENT CLIP IS CORRECTLY ENGAGED TO THE ANCHOR FITTING AND NOT HOOKED OR FITTED
TO ANY OTHER OBJECT BEFORE EACH USE OF THE RESTRAINT. THIS IS ESPECIALLY IMPORTANT IN
VEHICLES SUCH AS STATION WAGONS, VANS, HATCH BACKS OR VEHICLES WITHOUT A FIXED PARCEL
SHELF, SINCE THE ANCHOR POINT IS USUALLY NOT VISIBLE.
IMPORTANT INSTALLATION NOTE:
In some vehicles the anchor fitting in the rear vertical panel can only be installed in one way. Please refer
to vehicle owner's handbook or a child restraint fitting station for correct method.
PRE-INSTALLATION ANCHOR FITTING
Anchorage Clip Cover
The shaded areas of this diagram illustrate the possible locations of the anchor fitting. Within each
shaded area is an anchor fitting showing the correct way to install the fitting. Ensure the anchor fitting
is aligned as illustrated unless stated otherwise in the vehicle owner’s handbook.
Extension Strap distance to be measured.
Length 300mm (Use Babylove part K304)
Length 600mm (Use Babylove part K305)
Available from all major child restraint retailers.
DISTANCE TO MEASURE
TO THE ANCHOR POINT
Correct engagement of
attachment clip to anchor fitting.
Adjustable Upper
Anchorage Strap
Front of Vehicle
Summary of Contents for BL7A/2010
Page 28: ...NOTES NOTES 55 54 ...
