BabyLove BL620A 2010, Instruction Book

Page: 10 / 29

18
HOW TO SET-UP HOW TO SET-UP
19
D. Place baby into Carrier lying on its back so
that the buckle is between the baby’s legs.
Correct fitment of the harness is very important as it restrains the baby in the
Carrier. The harness must fit firmly around upper torso of the baby and be
positioned so as to leave the baby’s arms and legs free.
This Carrier needs to be used until the baby reaches the shoulder height marker. It is
acceptable for the legs to be bent to fit.
C. Move the two harness tongues to
the outer extents of the Carrier and
connect to the Harness Tongue
holders. Move the harness buckle
towards the Harness Adjuster.
Buckle Tongue Holder on both
sides of the Carrier. Push
tongue inwards to engage.
E. The Carrier is fitted with three shoulder strap positions. As the baby grows, the
shoulder straps must be moved to higher slots.
The shoulder straps must be in
the slots which are nearest to the
child’s shoulders, but not lower
than the child’s shoulders.
8
1
2
3
4 4
5
6 6
7
9
10
1. Upper shoulder strap slots
2. Medium shoulder strap slots
3. Lower shoulder strap slots
4. Shoulder harness strap
5. Harness tongues & buckle
6. Lap strap slot
7. Crotch strap slot
8. Maximum Shoulder Height Marker
9. Harness Adjuster (under cover flap)
10. Adjuster Strap
If the baby is new born you will need to use either slot 2 or 3. With the baby in the
carrier, check that the slot is just above the baby’s shoulder. If the strap is not in that
slot then change the slot as described on the next page. If the slot is just above the
shoulders then go to page 21.