assembly
4
folding
9
2.
To assemble the front wheels -
Locate the steel attachment pin at the front of the chassis. Press locks on
each on each side of the wheel and slide upwards (fig 2a).
Press until the wheel ‘clicks’ into position.
To remove front wheels, press the lock on each side of the wheel and
slide wheel out (fig 2b).
3.
To attach the canopy, locate the plastic clips on both sides and
attach them to the frame (fig 3a).
Fasten rear of the canopy by using the velcro straps provided (fig 3b).
11.
To fold -
NOTE. The backrest should always be in the upright position and the
hood folded prior to folding.
Lift the plastic cross pedal upwards, using the toe of your shoe. Press the
secondary lock lever gently down until it releases (fig 11a).
Push the handles over and the pushchair will naturally fold (fig 11b).
Ensure the folding latch is locked (fig 11c).
Your stroller is equipped with a carry handle.
fig 2a.
fig 2b.
fig 3a.
fig 3b.
cross bar pedal
secondary lock lever
fold latch
fig 11a.
fig 11b.
fig 11c.
