Babylo SPRINT Instruction Manual Download Page 3

safety

10

3

to unfold

This vehicle is intended for one child from birth (0 months) and up to a maximum

weight of 15kg.

This product complies with BS EN 1888:2012.

    WARNING: 

Do not overload the pushchair.

Do not use this product if any part is broken, torn or missing.

Do not use replacement parts or accessories which are not approved by the

manufacturer. Always apply the parking brake when the pram is stationary.

Never leave a raincover, hood or apron on the product indoors, in a hot

atmosphere or near a heat source, as your child may overheat.

Take care when going up or down kerbs.

Take extra care in windy conditions.

Remove your child and fold the pushchair when going up or down stairs or

escalators.

To prevent damage, remove the raincover before folding the pushchair.

Do not place anything on top of the raincover.

Never leave your child unattended.

Ensure that all locking devices are engaged before use.

To avoid injury ensure that your child is kept away when unfolding and folding

this product.

Do not let your child play with this product.

Always use the restraint system. Ensure it is correctly fitted at all times.

Always use the crotch strap in combination with the waist belt section of the

harness.

Check that the pram body or seat unit attachment devices are correctly

engaged before use.

This product is not suitable for running or skating.

Use the most reclined position for new born babies.

Ensure the parking brake is engaged during the loading and unloading of

children.

The basket can carry a maximum load of 3kg.

Any load attached to the handle and/or on the back of the backrest and/or

on the sides will affect the stability of the product.

1. 

Locate the locking latch on the side of the stroller and release (fig 1a).

Hold the handle grip with one hand, and push forward the front leg

unit (fig 1b).

Step down on the plastic pedal loacated on the cross bars and

lift handle grips upwards (fig 1c).

fig 1a.

Locking latch

fig 1b.

fig 1c.

Summary of Contents for SPRINT







Reviews: