BaBylissPro ItaliaBrava BABFB1, Manual

Page: 4 / 10

7 8
Place screen into bottom part of
removable intake filter (Fig. 3).
5. Press with your finger around the
edge of the screen to lock mesh
screen in place (Fig. 4).
CAUTION
NEVER allow the power supply cord
to be pulled, twisted, or severely bent.
Never wrap the cord tightly around
the dryer. Damage will occur at the
high flex point of entry into the dryer,
causing it to rupture and short circuit.
Inspect the cord frequently for dam-
age.
Stop use immediately if damage
is visible or unit stops or operates
intermittently.
If the cord or dryer is damaged or does
not operate properly, return it for repair
to Dannyco. See back panel for instruc-
tions and address. No repairs should be
attempted by the consumer.
STORAGE – IMPORTANT
When not in use, your dryer should
be disconnected
, allowed to cool and
stored in a safe, dry location, out of
reach of children.
Do not wrap line
cord around dryer. Allow the cord to
hang or lie loose and straight at the
point of entry into the dryer.
LIMITED FOUR YEAR WARRANTY
BaBylissPRO will repair or replace (at
our option) your unit free of charge
for 48 months from the date of
purchase if the appliance is defective
in workmanship or materials.
To obtain service under this warranty,
return the defective product to the
service center listed. In the absence of
a purchase receipt, the warranty period
shall be 48 months from the date of
manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED
IN DURATION TO THE 48-MONTH DURATION
OF THIS WRITTEN, LIMITED WARRANTY.
Some states do not allow limitations
on how long an implied warranty lasts,
so the above limitations may not apply
to you.
IN NO EVENT SHALL BABYLISS BE
LIABLE FOR ANY SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES FOR
BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESSED OR IMPLIED,
WHATSOEVER.
Some states do not
allow the exclusion or limitation of
special, incidental, or consequential
damages, so the above limitation may
not apply to you.This warranty gives you
specific legal rights, and you may also
have other rights, which vary from state
to state.
is advisable in electrical circuit
supplying the bathroom. Ask your
installer for advice.
20. USE THIS APPLIANCE ONLY FOR
ITS INTENDED USE; DO NOT USE
THE UNIT WITH WIGS OR ANIMAL
COAT. DO NOT ADDRESS THE
AIR JET TO OTHER OBJECTS,
ELECTRICAL APPLIANCES OR
SIMILAR. THE MANUFACTURER
DENIES ALL RESPONSIBILITY
FOR IMPROPER USE OF THE AP-
PLIANCE.
SAVE THESE
INSTRUCTIONS
DOUBLE INSULATED
This electrical appliance is double in-
sulated so does not have ground con-
nection. The appliance is designed in
such a way that the electrical parts can
never come into contact with the outer
casing of the device.
OPERATING
INSTRUCTIONS
This appliance is intended for
professional use. Use on Alternating
Current (60 hertz) only. Standard
dryers are designed to operate at 110
to 125 volts AC. This dryer is not dual
voltage.
This appliance has a polarized plug
(one blade is wider than the other). As
a safety feature, this plug will fit into a
polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to
defeat this safety feature.
USER MAINTENANCE
Your dryer is virtually maintenance
free. No lubrication is needed. The
dryer must be kept clean for proper
operating performance. When clean-
ing is needed, unplug the cord,
allow to cool and clean dust and
lint from air intake openings with
a small brush or the brush attach-
ment of a vacuum cleaner. The outer
surface of the dryer should be wiped
clean with a cloth only.
Blocked or clogged air intake vents
will cause the dryer to overheat.
If
overheating occurs, an automatic safety
device will shut the dryer or the heat off
to prevent damage or personal injury. If
the unit or the heat cycles off, turn the
dryer off, unplug the cord, and allow the
dryer to cool for 10 to 15 minutes before
restarting. Make sure air vents are clean,
by following below steps.
1. Remove intake filter from back of
dryer by twisting counterclockwise.
2. Reach through opening, and press
the mesh screen to release it from
the filter (Fig. 1).
3. Visually inspect the filter to make
sure no hair is caught (Fig. 2). Rinse
the mesh screen ONLY under running
water to clear any debris. Repeat as
needed, or use a stiff bristle brush for
any difficult build-up.
4. Make sure the mesh screen is free
from any debris and completely dry.
Fig. 1
Fig. 3
Fig. 2
Fig. 4