Cutting guide
#1 – 1/8" (3 mm)
Cutting guide
#2 – 1/4" (6 mm)
Cutting guide
#3 – 3/8" (10 mm)
Cutting guide
#4 – 1/2" (13 mm)
Cutting guide
#5– 5/8" (16 mm)
Cutting guide
#6 – 3/4" (19 mm)
OPeRATING INSTRucTIONS
Remove the plastic guard protecting the blade. Apply a drop of the provided
lubricating oil across the blades; wipe off any excess of oil with a dry cloth. Plug
the clipper into electrical outlet. Push the "I-ON/O-OFF" switch to "I-ON" position.
When finished cutting hair, remove trimmings hair and debris from the blades
using the provided cleaning brush. Wipe the housing clean with a dry cloth.
Before replacing blade guard, apply a few drops of lubricating oil to the blades
to prevent any rust from occurring, this last procedure is important for the proper
maintenance of the blades.
This quality haircutting instrument has been manufactured with extreme care. It
has been thoroughly tested and inspected before reaching the user. As with all
precision instruments, there may be a period of breaking in. If the speed of the
motor varies (as indicated by a change in sound or pitch), it is an indication of a
change in position of the clipper or a fluctuation in line voltage. When the clipper is
lubricated in accordance with instructions, it will deliver ample power and speed
for haircutting requirements.
VeRy IMPORTANT: The blade must be cleaned and oiled
before, during and after each use with the provided cleaning
brush and lubricating oil for proper functioning.
OPeRATION
Before using the Class 2 Power Supply, read these instructions carefully. This
clipper should only be used with supplied adapter.
Input: 100–240V AC 50/60Hz 0.68A Max
Blade Guard
BAB604RC Cutting Blade
Cleaning Brush
Lubricating Oil
Taper
Lever
10-Foot Cord
BAB880C IB-13_279A.indd 5-6
2/2/15 11:30 AM
