•
IMPORTANT!
If the appliance is not released from the hair it will
beep continuously. To continue using the appliance, remove from the
hair and use as normal.
•
To allow the section to set, do not comb or brush the hair until it
cools.
•
After use, switch off and unplug the appliance.
Heat Settings
If you have delicate, fine or coloured hair, use the lower heat settings.
For thicker hair, use the higher heat settings.
It is suggested to always complete a test on initial use to ensure the
correct temperature is used on the hair type. Start on the lowest
setting and increase the temperature until desired result is achieved.
Below is a guide of the temperature settings:-
= OFF
• = 180°C (Green)
• • = 200°C (Orange)
• • • = 230°C (Red)
