IMPORtANt!
The BaByliss Pro 235 Elegance Straightener has a high
performance Advanced Ceramics™ heater and is designed to reach
very high temperatures. If the maximum setting is too hot for your hair
type then there are two lower temperature settings available to use.
CAUtION!
This is a high heat appliance. Care must be taken to avoid
the hot surfaces including the housing around the outside of the plates
coming into direct contact with the skin, in particular the eyes, ears,
face and neck.
INstRUCtIONs FOR UsE
• Ensure hair is dry and combed through.
• Press the button marked 'I' to switch on.
• Slide the temperature switch to select the desired straightening
temperature, using the symbols shown as a guide:
• = 180ºc
•• = 200ºc
••• = 235ºc
• If you have delicate, fine or coloured hair, use the lower heat setting.
For thicker hair, use the higher heat setting.
• The red indicator light will blink until the straightener has reached the
temperature setting requested.
• The green light will illuminate to indicate the appliance is on. The
red indicator light will blink until the temperature setting selected has
been reached. Once the temperature has been reached, the red
light will remain illuminated.
• Separate a section of hair.
• Place the section of hair between the straightening plates, close to
the roots.
• Hold the hair firmly between the straightening plates and slide down
the length of the hair, from root to tip.
• Repeat as necessary.
• Allow the hair to cool before combing through.
• After use, press the button marked '0' to switch off and unplug the
appliance. Wrap the appliance in the salon heat wrap and allow to
cool before storing away.
