4
pro 230 straightener
The straightener heating plates
have a new Ceramic and Titanium
micro-particle coating. Thanks
to this technology, the plates are
smoother and they guarantee per-
fect glide to respect your hair even
more.
FEATURES
• Plates with Ceramic Titanium
coating
• 25 setting temperature control
(from 130°C to 230°C)
• Fast heat up
• On/off switch with indicator light
• Automatic shut-off
• Swivel cord
USE
Before using, read the safety pre-
cautions at the end of the booklet.
To straighten your hair
• Before straightening, wash and
towel dry your hair then comb
through with a large-tooth comb
to untangle.
• Divide your hair into sections. Lift
the upper sections using clips so
that you can work with the sec-
tions underneath.
• Plug in the BaByliss pro 230 and
push the ‘I’ button. The red indica-
tor light comes on and will start
to flash. The first time you use the
unit, you may notice a little steam
and a particular odor: this is com-
mon and will disappear the next
time you use it.
• Select the desired temperature
using the temperature control.
Generally, we recommend the
unit be set to a lower tempera-
ture for fine, bleached and/or da-
maged hair, and a higher tempe-
rature for curly, thick and/or diffi-
cult to style hair. Every hair type is
different, so we recommend you
use position 1 the first time you
straighten. You can gradually in-
crease the setting gradually over
the next uses if necessary. Use the
table below as a guide :
Temperature
Hair type
130 – 160°C
Fine, bleached
and/or dama-
ged hair
160 – 200°C
Normal, colou-
red and/or wavy
hair
200 – 230°C
Thick and/or
very curly hair
• Allow the hot straightener to heat
up for about a minute. The red
indicator light will stop flashing
when the unit has heated up to
the selected temperature. Your
straightener is now ready to use;
the red indicator light will stay
on.
• Take a section about 2 to 3 cm
wide and place it between the
two heating plates, near the roots
of the hair.
• Press the straightener handles
ENGLISH
