EN
54
6.4. Modes of use
PRECISION mode
The Precision Mode, as described under points 7 to 10 above, allows for safe treatment of the least
accessible and most sensitive areas of your body (face, underarms, bikini line, etc.). Be careful when
treating your face. Make sure you attach the special face fi lter (only available on selected models) on
the appliance head (see the section “Epilation of the face with Homelight”).
GLISS mode
When the applicator window is properly applied to the skin and the release mechanism is held in,
the user can activate the Gliss mode (continuous release of 36 pulses per minute, at level 1). In this
way, there is an automatic continuous release of pulses without the need for additional handling.
You can thus easily slide the appliance over your skin without interruption in a slow and continuous
movement without lifting or lowering it.
Note:
If you lift the appliance while holding the release mechanism pressed in, the Gliss mode remains
active. But for your safety, no pulse is released until the appliance is in full contact with your skin.
Ensure that the contact sensor that forms the contour of the appliance’s applicator surface is
perfectly and fi rmly pressed against your skin to guarantee operation of the continuous fl ashes in
the Gliss mode. If you break the contact between the applicator surface and your skin, you have
5 seconds to adjust the appliance to ensure full contact with the skin while holding the release
button pressed in. If, after 5 seconds, contact is not full, the Gliss mode will deactivate and you will
have to let the release button go and press it again to restart the process.
If you lift the appliance and let go of the release mechanism, the Gliss mode will be deactivated.
The Gliss Mode is suitable for people who already have some experience with and some dexterity
using the appliance. With 36 pulses per minute (at level 1), the Gliss Mode lets you treat larger areas
of your body more safely and more quickly: legs, back, arms, torso, etc. For the sensitive areas and
the face, use the Precision Mode.
