EN
53
4. Press the ‘ON’ button to switch the appliance on. The ‘ON/OFF’ light will turn green. You will hear a
slight noise of a fan.
Your Homelight epilator is ready to use.
Please wear the safety glasses provided when using the Homelight epilator.
5. About 1.6 second (at level 1) after having pressed the ON button, the ‘Ready’ indicator light will
come on. The appliance is ready to release the fi rst pulse. The appliance is set to the lowest power
setting by default. The level 1 power indicator light is lit.
6. Select the power level that corresponds to your skin type (see table below) using the +/- buttons
located on the side of the appliance. The indicator lights that correspond to the selected power
level will come on in green. For example, for power level 3, the indicator lights for the fi rst 3 levels
will come on.
7. Press the application surface fi rmly against your skin so that there is full contact. When the
application surface is in full contact with the skin, the ‘Ready’ indicator light will start to fl ash.
NB: The appliance has a mechanism to protect your eyes, a contact sensor that prevents the
appliance from releasing a pulse if its application surface is not in full contact with your skin. If the
appliance is not in full contact with your skin, it will not release a pulse of light. Make sure, therefore,
that the application surface is correctly applied to your skin.
8. Press the release mechanism. The appliance will release a pulse of light. You may feel a slight warm
and tingling sensation.
9. Remove the application surface from the treated patch of skin.
10. Move the application surface to another area to be treated. Pressure marks left on your skin by
the application surface should help you to correctly align the epilator to administer the next
pulse, avoiding the release of two pulses on the same patch of skin or too much space being
left between the patches. (see ‘Covering the area to be treated’). Your Homelight appliance will
recharge immediately after each pulse. After 1,6 second (at level 1), the ‘Ready’ indicator light will
come on again. The appliance is now ready to release another pulse.
Warning: Never treat the same patch of skin more than once per depilation session!
Repeated treatment of the same area increases the risk of side eff ects.
