• Do not use the appliance if the lead is damaged. In the
event of lead damage, discontinue use immediately and
contact the Conair Customer Care Line (refer to ‘UK After
Sales Service’ section for further information).
• Do not leave the appliance unattended when switched on
or plugged in.
• This appliance is equipped with a safety thermostat. In
the event of overheating the appliance will either stop
automatically or run hot and cold intermittently. Should this
happen, switch the dryer to the “0” position, unplug and
allow to cool for 10 minutes. Before use, ensure the rear
filter is clear of hair and other debris. Plug in and switch
on. If the appliance continues to overheat, discontinue
use immediately and contact the Conair Customer Care
Line (refer to ‘UK After Sales Service’ section for further
information).
• Take care the air vents do not become blocked when in
use. Ensure the rear filter is clear of hair and other debris
before use.
• Do not place the appliance on any heat sensitive surfaces
whilst in operation.
• Take care to avoid the hot surfaces of the appliance
coming into direct contact with the skin, in particular the
ears, eyes, face and neck.
• This appliance should not be used by adults whose reduced
physical, sensory or mental capabilities, or whose lack of
experience and knowledge, might cause a hazard, unless
they have been correctly instructed to understand the safe
use and hazards involved and are adequately supervised.
