6
7
ENGLISH
With the BaByliss Curl Secret® IONIC styler, easily create beautiful curls
with long-lasting effect. No tedious handling, no complicated move, the
Curl Secret® IONIC makes gorgeous curls thanks to its clever automatic
system.
Read the safety instructions first.
PRODUCT FEATURES
•
Ceramic coating (1)
•
Fast heat up (max. 230 °C)
•
0-I-II switch : 2 heat settings - 210 °C (I) - 230 °C (II) (2)
•
3 timer settings (8, 10 and 12 seconds) with audio beep indicator for
various curl effects (3)
•
Ionic technology : shine and antistatic
•
Operated indication light (LED) (4)
•
Automatic shut off
•
Swivel cord (5)
•
Cleaning tool (6)
USE
Note:
•
When using the unit for the first time, you might notice a little smoke and a
distinct odour: this is common and will disappear in the following use.
•
When using the unit, you might see some steam. Do not be concerned, this
could be because of evaporation of the sebum, some residual hair products
(leave-in hair care, hairspray, etc.) or excess water that is evaporating from
your hair.
•
It is possible to use a heat protection spray for optimal protection of the
hair.
• The ionic generator inside the unit releases frizz-controlling ions on to the
hair to give a smooth, shiny finish when styling. Note: There will be a slight
buzzing sound from the styler which is from the ionic generator releasing
the ions. This is normal.
• Plug in the appliance, switch on and select the desired temperature
using the 0-I-II switch. See table below :
Temperature
Hair type
(I) : 210°C
Fine, lightened and/or damaged hair
(II) : 230°C
Normal, thick, wavy, curly and/or coloured hair
• The indicator light comes on and will start to flash.
• The indicator light will stop flashing when the appliance has heated
up to the selected temperature. The appliance is now ready to use; the
indicator light will stay on.
• Select the time setting depending on the desired curl effect. For loose
curls, select the minimal time setting. For more defined curls, select the
maximal time setting. Please refer to the table below :
Time
Audio beep indicator
Curl effect
8
8 seconds
3 beeps
Loose waves
10
10 seconds
4 beeps
Soft curls
12
12 seconds
5 beeps
Defined curls
• Ensure the section of hair is clean, dry and perfectly combed through.
• Clip the upper layers to the top of your head to work first with the layers
underneath.
• Separate a section of hair no bigger than 3 cm. Ensure the section is
combed through.
• The appliance must be positioned into the hair with the cylinder facing
towards the head. (FIG 1, 2).
• The hair section must be straight and placed neatly through the centre
of the appliance, between the handles.
• Once the hair is in place, close the handles to allow the hair to be
automatically taken into the appliance.
Note : If you continue to hold the hair section after closing the
handles then the styler will stop and beep to indicate that you must
release the tension on the hair. (FIG 3, 4). If you have taken too much
hair (a section of hair bigger than 3 cm) or the hair is not neatly going
through the centre of the appliance, the styler will again stop and
beep to indicate a problem. This safety feature ensures that there will
be no tangles.
• Continue to hold the handles closed until the end of the individual beeps
(after 3, 4 or 5 beeps depending on the selected time setting, see the
table hereabove).
• Release the appliance from the hair by opening the handles fully. Do
not pull away the appliance from the hair, it will straighten the curl out
(FIG 5).
• Allow your hair to cool before handling or combing.
• Repeat around the head until you have the amount of curls desired.
Note : The styler is equipped with an alternating curl direction
automatic system for a natural finish (FIG 6).
• After use, switch off and unplug the appliance. Allow to cool before
storing away.
14_C1100E_IB.indd 6-7
12/16/14 10:39 AM
