BaByliss PRO V-Blade BAB7476U, Quick Start Manual, Page: 5 / 14

INSTRUCTIONS FOR USE
Charging the Appliance
IMPORTANT!
Only use the adaptor supplied with this appliance.
This clipper is so easy to use, but before you do anything you must
take your time to charge the unit for 3 hours before its first use. Even
if you want to use it plugged in straight from the mains, this initial
supercharge ensures optimum power performance to give smooth fast
cutting every time. Maximum battery capacity will only be reached after
3 charging/discharging cycles. A full charge will provide approximately
75 minutes use. A 30 minute quick charge will provide approximately
30 minutes use.
When charging the appliance the blue LED charging light will flash
slowly and continuously until the battery has fully charged, then the
blue LED charging light will stop flashing but remain on.
Warning:
If the charging light suddenly starts to flash rapidly then
the appliance is faulty. If this happens then please stop charging and
remove the adaptor from the mains and contact our Customer Care
Centre for further advise (see the ‘After Sales Service’ section of the
information booklet).
Mains Operation
• Ensure the appliance is switched off.
• Connect the adaptor to the base of the appliance and plug the
adaptor into a suitable mains socket.
• The blue LED charging light will flash when the adaptor is correctly
inserted into the appliance and connected to the mains.
• The appliance is now ready for use.
• NOTE: The appliance should not be used for longer than 20 minutes
when operated from the mains.