BaByliss PRO LO-PRO BAB825U, Manual

Page: 9 / 20

REMOVAL AND REPLACEMENT OF BLADE
• Step 1. Unplug the unit and adjust the taper (see position in illustration
A).
Taper
A. B.
Small
Moving
Blade
Plastic Oscillator
• Step 2. Remove the screws and the fixed blade. Save the screws.
• Step 3. Lift off the small moving blade and replace it with the new one
on the plastic oscillator (see illustration B).
• Step 4. Replace the fixed blade using the screws and lightly tighten
them. Adjust the teeth, as shown in illustration C, to a gap of 1mm
to 1.5mm. The small, moving blade should be as centered and as
parallel as possible to the fixed blade’s teeth.
IMPORTANT NOTE:
The top edge of the fixed blade must be a minimum of 1mm higher
than the top edge of the moving blade and as centered as possible.
This is important so that the moving blade does not come in contact
with the skin.
C.
Small
Moving
Blade
Fixe Blade
1 to 1.5mm
C.