PREPARATION FOR USE
General
• Always inspect the appliance before use to ensure the clipper blades
are free from hair, debris etc.
• For best performance, use on clean, dry hair that has been combed
until tangle-free.
Oiling Instructions
• For optimum cutting performance, it is highly recommended to oil the
blades frequently using the oil provided.
• When using the oil for the first time, unscrew the cap and cut off the
very end of the plastic tube with a pair of scissors.
• Remove the blade guard and switch the appliance on.
• Gently squeeze the oil tube and apply 2 drops directly onto the
blades.
• Leave the unit on for a further few seconds to allow the oil to
thoroughly spread along the length of the blades.
• Switch off the unit and remove any excess oil by gently dabbing with
a cloth before using on hair.
Comb Guides:
This appliance is supplied with 6 comb guides:
Cutting Length
Grade
3mm (
1/8
’’)
#1
6mm (
1/4
’’)
#2
10mm (
3/8
’’)
#3
13mm (
1/2
’’)
#4
16mm (
5/8
’’)
#5
19mm (
3/4
’’)
#6
• To attach a comb guide, ensure the appliance is switched off. Position
the comb guide over the front of the clipper blade and slide over the
head. Push and click the rear of the comb guide into position.
• To remove the comb guide, ensure the appliance is switched off.
Push the tab on the rear of the comb guide away from the head and
lift off.
