Using the trimmer without the comb guide
• Using without the comb guide is ideal for detailing/shaping and
general tidying of edges.
• To detach the comb guide, gently hold the trimmer in one hand and
with your thumb and index finger push up on each side of the comb
guide (fig. 1). Flip the comb guide to the back of the unit, gently pull
down and secure under the latch to lock into place (fig. 2). To release
the comb guide, pull down and move away from the latch (fig. 3).
• Switch the Super Stubble XTP on by pressing the ‘‘power on’’ button.
The LED will illuminate and the blades will start to move.
• If you are looking for an ultra-close finish, you can use the trimmer
without the comb guide. This will give you an extremely short cut.
IMPORTANT:
please note when using the trimmer without the comb
guide, the cutting length will be below 0.4mm. The length setting
shown on the LED screen will no longer be relevant when the comb
guide is detached.
Super Stubble Top Tips
• Use on clean, dry hair.
• If possible, when using for the first time, try and grow your facial hair
for a few days before cutting so you can trim down to a level that is
best for you.
• Set the cutting length as required.
• It is always best to start cutting with a longer length first, then trim
again if the length is longer than desired.
Fig. 1
Fig. 2
Fig. 3
7898BU IB-18/117A.indd 8
10/26/2018 12:12 PM
