Note:
please make sure the motor spindle is positioned in the actuator
arm after reassembling the head (Fig 3)
Using the Rotary Trimmer Head
• Switch the trimmer ON.
• Gently insert the trimmer into your nose or ear to trim unwanted hair.
• Gently move it in a circular motion.
• Never switch the trimmer off whilst in the nose and ear hair.
Note: Use this trimmer only at the entrance to the ears or nose.
Do not use any deeper than this – this can cause injury.
Using the Wide Trimmer Head
• Switch the trimmer ON.
• Move the trimmer upwards and outwards through the hair you wish to
remove. The wide trimmer is ideal for neatening sideburns other small
areas of facial hair. Also attach the comb guide to tidy eyebrows.
To attach the comb guide
Slide the front 2 hooks over the front of the precision trimmer head,
gently pull back and down and clip the back hooks into place. Make
sure the comb guide is flush against the trimmer head.
To adjust the length of the comb guide
Slide the button on the top of the comb guide up to the appropriate
length. Each position increases the length by 2mm (position 1= 2mm
& position 5= 10 mm).
To remove the comb guide
Fig. 3
7180U IB-18/151.indd 6
4/10/18 4:41 PM
