The JACS Back Carry Straps
The Back Carry Straps are essential if you are planning to use the carrier unit for back-carrying. If you
have not purchased a Complete Package, you can upgrade your JACS by ordering these components as
an add-on product.
The straps ensure that the carrier unit has all six connection points attached by attaching in place of the
top straps and buckles of the babycarrier. Not only do they help distribute some of the load, but also
keep your passenger safe by strapping them in over the shoulders. Without them, your passenger might
attempt to climb out of the carrier, or could potential fall out if you bend down to far.
Carrier Unit Attachment
Tighten the upper straps of the carrier to their
shortest position and connect to the “female”
buckle of each Back Carry Strap
Harness Attachment
Thread the Back Carry Straps through the wide
webbing loop above the three MOLLE loops on
the harness rear.
Then connect the “Male” buckle to the upper
double buckle connection on the front of the
harness.
Tighten straps as necessary for a snug fit.
The Back Carry Straps can also be used in con-
junction with the Chest Pouch, enabling a high
position rear carry option for the Pouch compo-
nent.
NOTE
Summary of Contents for JACS Series
Page 1: ......
