MAINTENANCE
18
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
UNFOLD
17
Copyright © 2021, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 13a
lift from edge
13
•
SEAT REMOVAL:
To remove the seat, use
the edge of the seat to
lift it off the tabletop
(Fig. 13a).
• Ensure all the toys are
removed, and the seat.
•
TABLETOP:
To remove, push the 3
pins located on each
table leg (Fig. 13b).
Repeat the process for
the other table legs.
•
3 TABLE LEGS:
To remove, locate
the tab underneath
the base. Pull the
tab towards you and
remove the leg
(Fig. 13c). Repeat
for the other sides.
DISASSEMBLING THE ACTIVTY CENTER
Ensure all the toys are removed from the tabletop
before disassembling.
FRO
NT
Fig. 13b
Fig. 13c
Fig. 14a
Fig. 14b
SEAT FABRIC
DO NOT MACHINE WASH.
For
metal and plastic parts, use only
lukewarm water and mild soap
.
14
• To remove the seat fabric for
maintenance, pull out all the
plates from the tab on the seat
base (Fig. 14a).
•
To reattach the fabric, insert the
warning label side towards the
backrest of the seat base. Fold
the fabric over and insert the
rear center plate into the tab.
Continue to connect all plates
around the seat base tabs.
All plates and tabs must be
secured before use (Fig. 14b).
15
•
The Stoppers are there for
Stair Safety reasons, do
NOT
remove the stoppers
unless for replacement
purposes.
•
REMOVAL:
To remove, pull
out the stopper
(Fig. 15a).
•
REATTACH:
Push the
stopper into the housing
completely (Fig. 15b).
Ensure to apply enough
pressure when inserting
the stoppers.
STOPPER REPLACEMENT
For replacement, if lost or damaged
ONLY.
Fig. 15a
Fig. 15b
