background image

9

10

Copyright © 2018, Baby Trend, Inc.

Copyright © 2018, Baby Trend, Inc.

 3.0  Convertible Seat Parts

Removable upper 

seat back

Harness height 

adjustment 

release

Harness height 

adjustment 

release

Top tether

Upper seat 

back release

Instruction 

holder

Lower anchor 

connectors

Lower anchor 

connectors

Locking Clip 

Storage

Seat Base

4.0  Selecting A Vehicle Seating Location

WARNING!

DEATH or SERIOUS INJURY can occur:

•  Only use this Convertible Seat with the vehicle’s lap/shoulder 

belts or LATCH System.

•  DO NOT use this Convertible Seat with vehicle lap/shoulder belts 

mounted to the vehicle door or door frame.

•  DO NOT use this Convertible Seat if it cannot be properly 

installed. Some child restraints will not fit some vehicle seating 

positions.

•  NEVER use this Convertible Seat in any vehicle seating position 

equipped with an active air bag.

-  Read your vehicle’s owner manual to see how to turn off your 

airbag if you have no back seat or if a child must ride in the 

front seat. For side air bags see Section 4.1.

•  DO NOT use this Convertible Seat in the rear seat of a compact 

pickup truck. Severe head injury or death can occur.

•  DO NOT Use this Convertible Seat in a vehicle with side facing 

seats or rear facing vehicle seats. See Section 4.2. 

•  NEVER attempt to install this Convertible Seat without the upper 

seat back installed in forward facing position.

•  NEVER use this restraint in a forward facing position with the 

removable upper seatback removed.

•  NEVER attach two LATCH lower anchors to the same LATCH 

attachment point.

•  NEVER use both the LATCH lower anchors and the vehicle’s  

lap/shoulder belts at the same time.

Summary of Contents for PROtect Series






























Reviews: