14
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
FOLD / UNFOLD
13
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
MAINTENANCE
CARE AND MAINTENANCE
TESTING FOR PROPER WHEEL INSTALLATION
WARNING:
ALWAYS
check the double nut locking
system before each use to
ensure that the front wheel is
securely fastened to the frame.
21)
• Lift the front wheel off of the ground and
sharply strike the top of the tire (Fig. 21).
The wheel should not be loose or come off.
If you experience front wheel wobble
that is beyond what is normal for use
while walking or jogging you may have
to adjust the front wheel housing nut.
22)
• Reverse (Fig. 23a). Remove fender to
access nut. You can use a standard
crescent wrench to tighten the nut
(Fig. 22).
DO NOT OVER TIGHTEN
this can
cause the front wheel to not swivel
properly and will result in damage to
the wheel housing. When tightened
correctly, the front fork will have only
a slight drag when manually rotated.
Wheel and fork should not rotate freely.
When adjusting the front wheel, always
test the fork for a slight drag.
TO FOLD STROLLER
WARNING:
Care must
be taken when folding and
unfolding the stroller to prevent
finger entrapment.
CAUTION:
Do not allow
children near stroller while
folding.
19)
• Close the canopy as described in the
canopy section (step 8). Place the seat
in the furthest recline position.
• Fold the stroller by pulling both release
triggers (Fig. 19a). Press downward on
the stroller handle until the stroller is
completely folded. Lock the release lever
on the right side of the stroller (Fig. 19b).
TO UNFOLD STROLLER
CAUTION:
Do not allow
children near stroller
while unfolding.
20)
• Unlock the release lever (Fig. 20a) and
unfold stroller frame by pulling backward
on the stroller handle until the frame
locks (Fig. 20b).
Fig. 19a
Fig. 19b
Fig. 20a
Fig. 20b
Fig. 21
Fig. 22
