Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos Los Derechos Reservados.
WARNING
9
10
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
AVERTISSEMENT
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos Los Derechos Reservados.
9
10
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos Los Derechos Reservados.
ASSEMBLY
9
10
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Fig. 1a
Fig. 1b
TO ASSEMBLE FRAME
WARNING:
Do not sit on the
frame when the seat is not attached.
Do not use frame as a foot stool.
1)
• Take either the left or right Upper Frame
Assemblies, press and hold the button and
extend the frame then release the button
(Fig 1a).
• Insert the front tube of the right and left side
Upper Frame Assemblies into the Height
Adjuster (Fig. 1b). The front tube is easily
distinguished from the rear tube by the
array of holes located on the backside of
the front tube.
2)
• Squeeze the Release Handles on both
sides simultaneously and push the tube
through the Height Adjusters until it locks in
the highest position (Fig. 2).
Button
Release Handle
IMPORTANT!
To ensure safe operation of your product, please follow these
instructions carefully. Please keep these instructions for future reference.
IMPORTANT!
Before assembly and each use, inspect this product for
damaged hardware, loose joints, missing parts or sharp edges. NEVER use if any
parts are missing or broken.
IMPORTANT!
Adult assembly is required.
IMPORTANT!
Always check that the high chair is locked in the open
position before using.
ATTENTION:
Carefully remove parts from box. Check that
you have all the parts for this model before
assembling the high chair.
3)
•
Insert the Front Legs into the upper frame
assembly with the height adjustment slots
(Fig. 3a).
NOTE:
Ensure the pins click into
position.
•
Insert the Rear Legs into the upper frame
that does not have the height adjustment
slots (Fig. 3b).
NOTE:
Legs are properly connected
when the lock buttons are lined up with
the holes on the ends of the Upper
Frame Assemblies. Make sure the lock
buttons are engaged before use.
• Always lock brakes before use to prevent
movement. To engage brakes, apply
downward pressure to the brake tabs.
Check that the High Chair will not move
and that brakes are properly applied
(Fig. 3c).
Fig. 3c
Fig. 3b
Fig. 3a
Front Leg
Rear Leg
