background image

1.0

 General Warnings and Information

3

WARNING TO PARENTS AND CAREGIVERS

Proper use is required! Even if using this car seat seems 

easy to figure out, it is very IMPORTANT TO FOLLOW 

THE CAR SEAT AND VEHICLE OWNER’S MANUALS!

• Failure to follow these instructions and Car Seat labels can result in a 

child striking the vehicle’s interior during a sudden stop or crash.
- Your child’s safety depends on proper installation and  use 

of this car seat. Read and understand all information in this 

owner’s manual and product labels before using this car seat.

- Improper use of the car seat can result in serious 

injury or death from a sudden stop or crash.

The ultimate safety of your child depends on the proper and secure 

installation of the Car Seat in your vehicle.  Proper installation 

requires that you read and understand this entire manual and 

your vehicle’s owner’s manual before placing your child in the 

seat.  DO NOT allow others to install or use this Car Seat unless 

they completely understand its proper installation and use.

Your child’s safety depends on:

1.  Choosing the correct use mode for your child’s weight and

 height.

2.  Choosing the best location within your vehicle for installing the 

  Car Seat. Seating positions with frontal Air Bags must be avoided

  if possible.

3.  Proper installation. 

    a. Toddler Use Mode 

        -   Requires proper routing of LATCH or the vehicle seat 

            belts and using Top Tether. Use Top Tether as an 

            additional attachment to secure Car Seat whenever 

          possible.

4

        -   Car Seat must stay tightly secured in vehicle.

    b. Booster Use Mode

        -   Requires proper routing and adjusting fit of vehicle 

          lap/shoulder belt. 

    c. Always properly position the vehicle belts on your child and 

      snugly adjust the vehicle belts around child.

  NOTE: Not all vehicle seat belts or vehicle seats can be used with  

            this car seat.

4.  Proper belt adjustment.

    -  Properly position belt on child.

    -  Snugly adjust belts around child.
No car seat can guarantee protection from injury in every 

situation, but proper use helps reduce the risk of serious injury 

or death.
NEED HELP?

Contact Baby Trend Customer Service Department at 1-800-328-7363 

with any questions concerning your car seat.  Please have the model 

number and manufactured in (date) on your car seat available when 

calling or contact one of the following resources: 
  •  Call 1-866-SEAT CHECK (1-866-732-8243).

  •  Log onto www.nhtsa.gov

      -  For a car seat inspection station select “Locate a Child Safety 

        Seat Inspection Station By State or Zip Code”.

      -  To locate a certified “Child Passenger Safety” Technician in 

        your area, select tab “Vehicles & Equipment”, select topic 

        “Child Seats” and then select link “Child Passenger Safety 

        Contact Locator” or “Child Passenger Safety Seat Inspection 

        Station Locator”.

  •  Log onto www.seatcheck.org.

1.0

 General Warnings and Information

Summary of Contents for HYbrid 3-in-1

















































Reviews: