TO UNFOLD STROLLER:
DO NOT allow children near stroller while unfolding.
1. Release the folding latch located on the right side.
2. Lift up on the stroller handle with both hands making sure the
stroller frame is erect and locks in the open position. (Fig. 7)
The stroller has spring - loaded latches on both sides of the
frame. Test that both latches are fully engaged prior to placing
your child in the stroller.
3. Extend the front frame by rotating it forward. (Fig. 8b). Slide the
two plastic fittings forward and then back so both latch securely
onto the front tubes of the stroller frame. (Fig. 8a)
TO ATTACH AN INFANT CAR SEAT:
1. Place car seats onto snap bars with stroller open and locked in
place. (Fig. 9) Please refer to the chart on next page for snap bars’
positions. (Fig. 12) NOTE: Some brands of infant car seats will
lock onto the snap bar, and some brands may simply rest on the
bar,
you must
ALWAYS
use the safety belt to secure every car
seat that is placed on the Snap-N-Go.
2. Strap the safety belt over the carseat and connect the buckles
together. Tighten the strap so the car seat fits snug and can’t
move. (Fig. 10) NOTE: Some car seats have slots for the safety
belt to slide through, if you have a car seat with these slots
please feed the safety belt through each slot and secure. (Fig. 11)
WARNING:
Avoid serious injury
from falling, ALWAYS use the safety belt to
secure both of FRONT and REAR car seats.
WARNING:
When loading, car seat
in REAR position first, then 2nd car seat in
FRONT position. When unloading, remove
FRONT car seat first then REAR car seat second.
Fig. 7
Fig. 9
Fig. 8a
Fig. 8b
Fig. 10
Fig. 11
5
Copyright © 2006 - 2010, Baby Trend Inc., All Rights Reserved.
