WARNING:
All top rails MUST be
straight and locked in position or child may
become entrapped and suffocate.
See figure 9 and 10.
5. Place mattress in Playard with padded side up (Fig. 11).
NOTE: DO NOT insert mattress if using bassinet feature. Go to
bassinet instructions.
6.
Feed the 3 hook and loop straps (found underneath the mattress),
through the slots on the bottom of the sides of the Playard. Fasten
the hook and loop straps to the underside of Playard to prevent the
mattress from moving (Fig. 12) (Fig. 13).
WARNING:
To prevent child from
becoming entrapped under the mattress pad
and suffocating, hook and loop straps MUST
be secured to underside of Playard.
7. The organizer can attach to any side of the playard. Insert the plastic
hooks into the organizer as shown in (Fig 14 ). For best results, attach
the organizer on the long side of the playard.
8. Attach the organizer, by pushing the plastic clips down over the top
rail. (Fig. 14 A). The maximum weight capacity of the organizer is 3
pounds.
9. To operate the brakes on the wheels, press downward on the brake
lever as shown in figure 15. To release, lift upward on the lever.
Assembly is now complete and playard is ready to use.
4
Figure 4
Left
Right
Figure 6
Left
Figure 5
Right
Insert
axle from
outside
Insert
axle from
outside
Outside
Inside
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 14
Figure 12
Figure 13
Figure 15
Figure 14A
LEF
T
RIGHT
