background image

CONTENTS (Fig. 1-1):

1  Playard
1  Mattress
1  Organizer
2  Leg extensions (1 Left,1 Right)
2  Leg extensions (1 Left, 1 Right) with Wheels, 
 

and hardware

1  Travel or Storage bag

BEFORE YOU  BEGIN:

   The  Baby Trend  Playard  is  designed  so  that, 

when  properly  setup,  the  fabric  of  the  playard  places  pressure  on  the  4 
top  rails  making  them  nearly  impossible  to  unlock.    This  safety  feature 
is activated when you push down on the playard floor to lock the bottom 
rails.  When setting up the playard, if  you allow the bottom rails to lock 
before locking the top rails, the fabric pressure will not allow you to lock 
the top rails.  Please see (Fig. 7.) for the proper position of the bottom of the 
playard when locking the top rails.  Always keep fingers away from corners 
when setting playard up.

1.  Unzip bag and remove Playard frame (Fig. 1).  Undo the 3 Velcro straps 

and set mattress aside (Fig. 2). 

2.  Turn the playard upside down. (Fig. 3). Push each leg extension into 

the bottom of the leg until both sides of extension snap into place.  (Fig. 
4).  Check that the extension is firmly connected.  Attach the wheels to 
the playard with the axle and nut as shown in figure (Fig. 5).  The brake 
cluster on the wheel must face to the inside.  The axle is inserted from 
the  outside  to  the  inside.  (Fig.  6).    Check  that  the  wheels  are  firmly 
connected.

3. 

Stand Playard on legs keeping feet of playard close together as shown in 
(Fig. 7).  Pull up on top rails until all rails “click” and “lock”.

*  READ IMPORTANT:  In order to continue, the handle in the center 

of the floor of the Playard MUST remain raised in order  for the 
rail to lock (approx. 45.7 cm or 18 inches).  The feet of the playard 
should almost touch each other.  All 4  bottom rails must be pointed 
upward in order to LOCK top rails.

4.  Push down on center of Playard floor until it is flat and locks into  

position (Fig. 8).  The center lock mechanism will lock automatically. 

NOTE:  Test rails to make sure they are locked.  Push down  on each 
rail making sure they are rigid and in a set position.

Figure 1-1.

Figure 2.

Figure 3

FOR THE SAFETY OF YOUR CHILD, PLEASE READ THE INSTRUCTIONS COMPLETELY 
BEFORE ASSEMBLING THE PLAYARD, BASSINET AND CHANGING AREA

TO ASSEMBLE PLAYARD

Figure 1.

Leg extensions

Wheels

3

Summary of Contents for 8206BCC












Reviews: