3
Installation Procedure (Using Computer and
USB)
■
Installation Overview
First, obtain a Certification Key by accessing the URL indicated on
the Activation card. Then, use the CERTIFICATION key within the
Settings screen to activate the upgrade program on the machine.
In the procedures section,
indicates operations performed
with the machine and
indicates operations performed with
the computer.
[Step 1, page 5] Make a note of the internal machine
identification number (No.).
[Step 2, page 5] Access the URL indicated on the
Activation Card.
[Step 3, page 5] Follow the instructions for obtaining
the Certification Key.
[Step 4, page 9] Install the upgrade program on the
sewing machine.
[Step 5, page 10] Remove the USB media device and
turn the machine off then on again.
[Step 6, page 10] After the upgrade has been
successfully installed, certify the appropriate kit number
in the Settings screen of the machine.
Memo
• For the procedure on certifying the kit via a wireless network
connection, refer to “Installation Procedure (Using Wireless LAN)”
on page 12.
