12
Installation Procedure (Using Wireless LAN)
a
Check that the machine software is version 2 or later.
If the machine software is earlier than version 2, certify the kit
according to the procedure in “Installation Procedure (Using
Computer and USB)” on page 3.
b
Confirm that your machine is connected to wireless LAN.
c
Press
in the Settings screen.
d
Press the Kit number you are working with to certify.
e
Press .
f
Using a coin etc., gently scrape the hiding seal off the
“Activation Card”.
g
Type in the 16-digit number written in the activation card to
, and then press
.
h
Certification has been completed when the success message
appears in the screen. Turn off the machine and then turn on
again.
i
Confirm that there is a check mark beside the Kit number in the
Settings screen.
j
Using a computer or tablet with Internet connection, access the
URL indicated on the Activation card to download the following
guides:
• Instruction and Reference Guide
• Embroidery Design Guide
• Instruction and Reference Guide Addendum
