![background image](http://html.mh-extra.com/html/baby-lock/jubilant-bl80b/jubilant-bl80b_instruction-and-reference-manual_462462052.webp)
Utility stitches
50
d
Put the extra spool pin in the hole on the top of the
machine and put the spool of thread onto the extra
spool pin.
e
Thread the machine with the second upper thread.
Without passing the thread behind the needle bar
thread guide, manually thread the right needle with the
second upper thread.
Insert the thread through the eye of the needle from the
front to the back.
f
Attach zigzag foot “J”.
• For details on changing the presser foot, refer to
“Replacing the presser foot” on page 21.
g
Turn on the machine.
h
Select a stitch.
• For stitch selection refer to “Basic sewing” on
page 23.
• Refer to “Stitch Chart” on page 33 for stitches that
can be sewn with a twin needle. You can also sew
with a twin needle when you select a satin stitch
pattern. In this case, use zigzag foot “J”.
i
Set the machine to use the twin needle setting.
Press
(Needle mode selection key).
The twin needle mode is selected.
j
Start sewing.
1
Thread spool
2
Extra spool pin
1
Needle bar
thread
guide
CAUTION
• When using the twin needle, be sure to attach
zigzag foot “J”.
CAUTION
• When using the twin needle, be sure to select
an appropriate stitch, otherwise the needle
may break or the machine may be damaged.
a
b
a
CAUTION
• When using the twin needle, be sure to select
the twin needle setting, otherwise the needle
may break or the machine may be damaged.
CAUTION
• Do not try turning the fabric while the twin
needle is down in the fabric, otherwise the
needle may break or the machine may be
damaged.
• If bunched stitches occur, use monogramming
foot “N” or attach stabilizer material.