Sewing
24
g
Lower the presser foot lever.
h
Adjust the sewing speed with the sewing speed
controller.
You can use this controller to adjust sewing speed
during sewing.
i
Press the “Start/Stop” button to start sewing. (When
the foot controller is plugged in, slowly press down on
the foot controller.)
Guide the fabric lightly by hand.
j
Press the “Start/Stop” button again to stop sewing.
(When the foot controller is plugged in, remove your
foot from the foot controller.)
k
Press
(Needle position button) to raise the needle.
l
Raise the presser foot lever, and then remove the
fabric.
m
Pull the fabric to the left side of the machine, and then
cut the threads by using the thread cutter.
n
Check the sewing finish. If necessary, adjust the thread
tension. (page 27)
■
Using the foot controller
You can also use the foot controller to start and stop
sewing.
a
Turn off the machine.
b
Insert the foot controller plug into the foot controller
jack on the machine.
c
Turn on the machine.
d
Slowly depress the foot controller to start sewing.
e
Release the foot controller to stop the machine.
1
Fast
2
Slow
Memo
• When the foot controller is being used, you cannot start
sewing by pressing the “Start/Stop” button.
a
b
Memo
• When the foot controller is connected, you cannot use
the “Start/Stop” button.
• Bobbin winding can be started and stopped with the
foot controller.
1
Foot controller jack
Memo
• The speed that is set using the sewing speed controller
will be the foot controller’s maximum sewing speed.
1
