Finishing Sewing
1
To lock stitches,stitch to the end of seam and stop.
2
Push down on the reverse sewing lever and stitch
backwards for 1 cm (3/8 inch) from the fabric edge.
You can use stitches to lock the threads at the end of
the seam.
6
2
Removing the Material from the Machine
1
Stop the machine.
Raise the needle to its highest position and make sure that the thread
take -up lever is also in its highest position.
2
Lift the presser foot and pull the fabric out gently to the left side of the machine.
3
Cut both threads with the thread cutter on the left hand side of the machine.
3
Sewing Heavy Fabric
When sewing heavy fabrics, the front of presser
foot tends to lift up and sewing will hesitate at the
point where the fabric is thicker, such as a cross seam.
In this case, place a piece of cardboard or fabric of same
thickness under the rear section of the presser foot to
level presser foot.
The presser foot lever can be raised 1 step higher
for placing heavy materials under the presser foot
easily.
Careful guide the fabric with your hand when sewing
over thick fabric areas.
-20-
