Baby Lock Ellisimo Gold 2 BLSOG2 Instruction And Reference Manual Download Page 258

Page: 258 / 364

USING THE MEMORY FUNCTION

256

Press the key of the pattern you want to
retrieve.

Press

to return to the original screen.

Press .

Press

to delete the pattern. The pattern will

be deleted from the USB media.

→

The sewing screen is displayed.

Recalling from the Computer

Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine (see page 253).

On the computer, open “Computer (My
computer)” then go to “Removable Disk”.

Move/copy the pattern data to “Removable
Disk”.

→

Pattern data in “Removable Disk” is written to the
machine.

Press .

→

The patterns in the computer are displayed on the
selection screen.

Note

• While data is being written, do not discon-

nect the USB cable.

• Do not create folders within “Removable

Disk”. Since folders are not displayed, stitch
pattern data within folders cannot be
recalled.

Summary of Contents for Ellisimo Gold 2 BLSOG2













































































































































































































































































































































































Search results

Summary of Contents for Ellisimo Gold 2 BLSOG2

Reviews:

Related manuals for Ellisimo Gold 2 BLSOG2

Brands by name

Popular brands

Baby Lock Ellisimo Gold 2 BLSOG2, Instruction And Reference Manual

Search results

Summary of Contents for Ellisimo Gold 2 BLSOG2

Reviews:

Related manuals for Ellisimo Gold 2 BLSOG2

Brands by name

Popular brands